Support and Resistance in Stock Trading: A Practical Guide.
If you’ve ever watched a trade reverse the moment you entered, or been stopped out just before price moved in the direction you expected, there’s a good chance you were misreading where price was likely to pause or turn. Support and resistance in stock trading are the most fundamental concepts in technical analysis, and getting them wrong is expensive. They’re also the concepts most traders think they understand far better than they actually do.
Most beginners can recite the definition in seconds: support is a price floor, resistance is a price ceiling. The problem is that knowing the definition and being able to use these levels reliably on a live chart are entirely different skills. The gap between the two is where most trading losses happen.
By the end of this guide, you’ll know how to identify valid support and resistance zones across multiple timeframes, apply concrete rules for trading bounces and breakouts, place stops and targets in logical positions, and combine a few confirming tools to cut out the false signals that trap most traders. This is the practical framework that actually works in Australian and US stock markets.
What support and resistance mean in stock trading
Most traders can define these terms, but far fewer understand the mechanics behind them. That gap is exactly why they misapply S&R concepts on live charts, treating lines as magical barriers rather than understanding why price reacts at these levels in the first place.
The supply and demand mechanics behind every price level
Support forms where demand is strong enough to absorb the selling pressure in the market. As price drops toward a certain level, buyers who recognise the value there become more aggressive while sellers pull back. That concentration of demand acts as a floor, slowing or stopping the decline. Resistance works in the opposite direction: as price rises toward a particular zone, sellers who bought earlier look to exit at a profit, and new buyers hesitate at what they perceive as an expensive price. That excess supply overwhelms demand and acts as a ceiling.
What makes a level significant isn’t a random price number. It’s the cluster of orders that exist there, from institutional positioning, from traders who entered at that level previously and remember it clearly, and from the collective memory of the market. When BHP pulls back to $43.20 and reverses strongly three times over six months, every trader watching that chart knows the level. The more eyes on it, the more valid it becomes as a future reference point.
How a broken level flips its role (and why this matters)
Role reversal is one of the most actionable concepts in price action trading, and it’s surprisingly underused by beginners. When price falls decisively below a support level, that same level tends to become resistance on the next rally. When price breaks above resistance, that level typically becomes support on any subsequent pullback.
The reason this flip happens is psychological. Imagine a group of traders who bought shares at $18.00, thinking it was solid support. Price drops through $18.00 and keeps falling. Those traders are now sitting on a loss. When price eventually rallies back toward $18.00, many of them sell to break even, which is exactly what creates the resistance. Their desperation to exit at the same price they entered is the mechanism that makes the old support act as new resistance. Understanding this makes the breakout-retest pattern, which we’ll cover later, far more intuitive.
Why some S&R levels hold more reliably than others
Not all price levels carry the same weight, and treating them equally is a common beginner error. A level that price has tested three or four times without breaking is significantly more meaningful than a minor swing on a 5-minute chart. Each time price touches a level and bounces, it reinforces the belief of market participants that the level matters, which in turn draws more orders there ahead of the next test.
Two other factors strengthen a level: the timeframe it formed on, and whether a significant price move originated from that zone. A level visible on the weekly chart almost always overrides an intraday level. A reversal that happened at $52.00 six months ago and launched a 15% rally is a far higher-quality reference point than a minor hesitation from last Tuesday. Build the habit of being selective, fewer, higher-quality levels on your chart will serve you far better than a cluttered mess of lines drawn at every minor wiggle.
How to identify valid support and resistance zones on a stock chart
Theory gets you started. Knowing exactly how to mark up a chart in a way that’s clean, actionable, and grounded in real price structure is where beginners need the most practical guidance. The primary tool is straightforward: swing highs and swing lows.
Reading swing highs and lows as natural turning points
A swing high is a price peak with at least two lower highs to the left and right of it. A swing low is a price trough with at least two higher lows flanking it. These are the natural turning points in a market, the spots where direction changed, and they form the backbone of any S&R analysis. On a daily chart, they represent genuine shifts in the balance between buyers and sellers.
When you’re scanning a daily chart, look for the obvious peaks and troughs first. These are the points where price stalled, reversed, and moved significantly in the other direction. A $2.00 reversal on a $40 stock is worth noting; a 10-cent hesitation on heavy intraday noise is not. The rule is simple: focus on major swings, not every minor wiggle. If a swing point isn’t immediately visible to the naked eye, it probably isn’t significant enough to trade. For a deeper look at chart patterns that form these swings, see Master Trading Chart Patterns For Profitable Trades.
Drawing your lines without overcomplicating the chart
Once you’ve identified your key swing points, draw a horizontal line at the exact high or low of that bar. Accept that price won’t touch the exact same cent twice; markets are not mechanical. If price reverses at $52.38 one time and $52.51 another, that’s still the same level. Don’t discard it because the numbers aren’t identical.
Keep the chart clean. Limit yourself to three or four major levels at any given time. A chart crowded with twenty horizontal lines creates paralysis rather than clarity, and in a fast-moving market, you need to be able to read the structure at a glance. Apply a simple self-check: if you can’t explain why a line is on your chart within ten seconds, it doesn’t belong there. Remove it and work with what genuinely matters to your trade decision.
Distinguishing major levels from minor noise
Daily chart levels override intraday levels in almost every situation. A resistance zone that formed on the daily chart over three months will stop a move dead in its tracks regardless of what the 5-minute chart shows. Intraday traders who ignore daily chart structure regularly find themselves buying into resistance or selling into support without realising it.
When evaluating whether a swing point is worth trading, ask three questions: What timeframe did it form on? Has price tested it at least twice? Did a meaningful move originate from that level? A level that scores well on all three criteria is worth marking. Minor intraday swings still have value for fine-tuning entries, but they should only complement the primary structure from the daily chart, never replace it. For a concise technical overview of support and resistance principles, many traders find Fidelity’s guide to support and resistance a useful additional reference.
Why zones matter more than exact price lines
One of the most consistent errors among new traders is treating support and resistance as precise, single-price lines. Price doesn’t work that way. Markets are driven by the decisions of millions of participants, and those decisions don’t cluster at a single tick. They cluster across a range of prices, which is why zones are a far more realistic and useful framework for support and resistance in stock trading.
The problem with pinpoint accuracy in price action
Say a trader draws a line at $52.40 because that was the exact high of a key reversal candle six weeks ago. Price rallies, stalls at $52.55, and reverses sharply. The trader looks at their chart, sees that price didn’t touch their line, and assumes the level is irrelevant. They either ignore the reversal signal or, worse, enter a long trade just as price is about to fall. The level held perfectly; their framework for interpreting it was simply too rigid.
A single-price line sets up constant false invalidations. It creates scenarios where a minor wick above the line triggers a stop on an otherwise valid setup, or where price reverses just short of the line and the trader misses the entire move. Switching to a zone-based approach eliminates most of these problems and keeps traders in setups that are genuinely working.
How to draw a zone instead of a line
For a resistance zone, use the body of the key reversal candle as the lower boundary and the wick as the upper boundary. Shade the area between those two price points. That shaded region is your zone of interest, the area where sellers have historically been active. For a support zone, reverse the logic: the wick forms the lower boundary and the candle body forms the upper boundary.
Once price enters the zone, your job isn’t to assume an immediate reversal. Your job is to watch for a reaction. A strong bearish candle closing within the resistance zone tells you something different from a candle that slices straight through the upper boundary on high volume. The zone is the context; the candle behaviour inside it gives you the signal to act on. For additional practical methods on defining and trading support and resistance zones, see Price Action University’s support and resistance strategies.
Four tools that sharpen your S&R analysis
Swing highs and lows give you the foundation of any S&R framework. Layering a few additional tools on top makes it significantly easier to confirm whether a level is worth trading, particularly when those tools converge in the same price zone.
Trendlines as dynamic support and resistance
Static horizontal levels work well in ranging or consolidating markets. In a trending market, trendlines serve as dynamic S&R that moves with price. An uptrend support line connects consecutive higher swing lows; a downtrend resistance line connects consecutive lower swing highs. As with horizontal levels, a trendline becomes more reliable each time price touches it and respects it without breaking through.
Trendline breaks carry real trading significance. When an uptrend support trendline is violated decisively, it signals that the structure underpinning the trend has weakened and that a potential reversal or deeper correction is underway. This isn’t a standalone signal to short, but it absolutely warrants tightening stops on long positions and reducing exposure to the upside.
Moving averages as living S&R levels (the 50-day and 200-day)
The 50-day and 200-day moving averages are widely watched by institutional traders, fund managers, and retail participants across both the ASX and US markets. Because so many participants reference them, they become self-fulfilling levels of dynamic support and resistance. In an uptrend, price frequently pulls back to the 50-day MA before resuming higher. A bounce off the 200-day MA in a strong uptrend is one of the cleanest high-probability setups available to a swing trader.
For intraday traders operating on shorter timeframes, the logic translates directly. The 9-period and 20-period moving averages on a 15-minute or 5-minute chart perform the same dynamic support and resistance role that the 50-day and 200-day perform on the daily chart. The key is consistency: pick your MAs, understand how price has historically interacted with them on the instrument you’re trading, and stick with the framework.
Pivot points for intraday traders on Australian and US sessions
Pivot points are calculated from the prior session’s high, low, and close. The central pivot point (PP) is (High + Low + Close) ÷ 3. From there, the key levels are:
- R1 = (2 × PP) − Low
- R2 = PP + (High − Low)
- S1 = (2 × PP) − High
- S2 = PP − (High − Low)
These levels reset each session, giving intraday traders a fresh set of reference points for anticipating where price might stall or reverse during the ASX or NYSE session.
Pivot point support and resistance levels are most useful as a secondary filter rather than a primary signal. When R1 sits within a few cents of a major horizontal resistance zone on the daily chart, that confluence makes the combined level far more significant than either tool alone. Intraday traders who use pivot points in isolation, without reference to the broader daily chart structure, frequently find themselves trading weak levels that hold one day and fail the next.
Stacking confluence: when multiple tools agree
Confluence is the highest-probability filter available to a technical trader. When a horizontal swing level, the 50-day moving average, and a pivot point resistance level all sit within the same price zone, the probability of a meaningful reaction at that zone rises substantially. Each tool draws its own set of market participants; when they all point to the same area, the order concentration in that zone becomes significantly denser.
Build the habit of scanning for confluence before entering any trade. Before placing a long at support, check whether the 50-day MA or a relevant trendline is nearby. If you’re an intraday trader, check whether the daily chart level aligns with the prior session’s S1 pivot. This takes an extra two minutes but fundamentally changes the quality of the setups you act on. Confluence is a filter, not an extra step, it cuts out the marginal setups and leaves you with the high-probability ones.
Picking the right timeframe for your S&R analysis
The timeframe you use to identify price levels should match your trading style directly. Using a day trader’s timeframes for swing trading leads to trading weak, unreliable levels. Using a swing trader’s timeframes for intraday trading means missing the actual market structure that’s relevant to your trade duration. Getting this alignment right is a non-negotiable part of a consistent process.
Swing trading: the daily, weekly, and 4-hour approach
For swing trading Australian and US stocks, the daily chart is the primary S&R reference. It shows where price has historically reversed or consolidated with the most clarity, and it’s the timeframe where the most significant order clusters tend to form. The weekly chart provides context for the dominant long-term trend and highlights the major structural levels that are unlikely to break without a significant catalyst.
The 4-hour chart is used for entry timing. It provides six times the detail of the daily chart while filtering out the noise of shorter intraday movements. A setup that looks clean on the daily chart often shows a much clearer entry signal on the 4-hour, whether it’s a bullish engulfing candle forming at support or a momentum surge confirming a breakout. This top-down approach keeps every entry decision aligned with the bigger market picture, which is exactly where traders who operate exclusively on lower timeframes go wrong.
Day trading: 15-minute and 5-minute chart structure
Intraday traders work from the 15-minute chart for structure and the 5-minute chart for execution. The 15-minute chart shows intraday trends with enough clarity to identify meaningful S&R levels for the session without the constant noise of a 1-minute chart. The 5-minute chart is where entries are timed, where confirmation candles are read, and where stops are placed.
The critical point that many intraday traders overlook: major daily chart levels do not disappear because you’re trading on a 5-minute chart. If there’s a daily chart resistance level at $38.50 and you’re looking to enter a long trade on the 5-minute chart with a target at $38.60, you’re setting yourself up to run directly into that resistance. Always know where the daily levels sit before the session opens. They are the most reliable price structures in the market, regardless of the timeframe you’re trading on.
The top-down method: starting from the bigger picture
The top-down approach is the most reliable framework for aligning timeframes. Start on the weekly chart to identify the dominant trend and the major support and resistance levels that have formed over months or years. Drop to the daily chart to identify the current trend context, the specific S&R zone you’re planning to trade, and whether price is approaching that zone with momentum or from a distance. Then drop to the 4-hour or 15-minute chart to find the precise entry signal within that context.
A bounce setup at daily chart support confirmed by a bullish pin bar on the 4-hour chart, in a stock that’s been in a clear uptrend on the weekly chart, is a fundamentally different trade from a random 5-minute signal with no higher-timeframe context. The first has the weight of multiple timeframes behind it. The second is noise. The top-down approach is what separates structured, repeatable analysis from reactive screen-watching.
Trading bounces the right way
Bounce trading offers some of the cleanest risk-reward profiles available in technical trading. You know the level you’re trading at, you know where to place your stop if it fails, and you know your target from the structure of the chart. Done without discipline, though, bounce trading becomes the market equivalent of catching a falling knife.
The confirmation candle rule: never trade the touch alone
The single most important rule for bounce trading is this: wait for a confirmation candle before entering. A pin bar with a long lower wick and a small body near the top signals that price pushed into support, sellers failed to sustain the move, and buyers stepped in aggressively. A bullish engulfing candle at support tells you that buyers completely absorbed the prior bearish candle and flipped momentum. A doji with rejection wicks at a resistance zone tells you that neither side dominated, but the failed attempt to push higher suggests sellers are defending the level.
What these price action candles share is a story. They tell you that the market has tested the level and reacted there in a meaningful way. Entering the moment price touches support, without waiting for a candle to close, is how traders take losses at levels that genuinely hold. The 20 minutes you spend waiting for the candle to close is the most valuable part of the trade. If you enter before it closes and price slices straight through the level, you’ve committed capital to a setup that was still unresolved. Patience at this stage is not optional; it’s the discipline that makes bounce trading profitable. For a focused list of the core patterns to watch in these scenarios, refer to 7 Price Action Trading Patterns Every Trader Must Know.
Entry timing, stop placement, and position sizing for bounces
Once a confirmation candle closes at your level, enter at the open of the next candle. Place your stop just below the support zone for long trades, with a buffer of roughly 5 to 10 points depending on the instrument and its average daily range. For short trades at resistance, the stop goes just above the zone with the same buffer logic. The stop is positioned below the area where buyers are expected to be active; if price trades through that area with conviction, the setup has failed and you need to be out.
Position size flows directly from the stop distance. If your stop is 20 points below your entry and you’re risking $200 per trade, your position size is 10 shares. The distance to your target determines whether the trade makes the cut: use a minimum 1:2 risk-reward ratio. If your stop is 20 points away, the target needs to be at least 40 points away. The target for a bounce trade is the next clearly defined S&R level in the direction of the trade. If that level is only 15 points away and your stop is 20 points below entry, skip the trade, the maths don’t work, and forcing it leads to consistent losses on otherwise valid setups.
How to trade breakouts without getting trapped
Breakout trading looks simple until you’ve been caught on the wrong side of a fake out. Research consistently shows that false breakouts occur in roughly 50 to 70 percent of all breakout attempts, meaning for every genuine breakout, there are two or three false ones. Trading every breach of a level aggressively is one of the fastest ways to drain a trading account.
Support and resistance in stock trading: the breakout-retest pattern explained
After a genuine breakout above resistance, price often pulls back to test that broken level, which now acts as support. This retest is the preferred entry for breakout traders precisely because it confirms that the breakout is holding. You’re entering after the market has validated the level flip: price broke above resistance, tested it as support, held, and is now showing strength again. That’s a far higher-probability entry than jumping in the moment the breakout candle closes.
The sequence unfolds in four steps:
- Price breaks above resistance on a strong candle.
- It pulls back toward the broken level over the following sessions.
- Price tests the former resistance (now support), forms a base, and produces a bullish reaction candle.
- The entry is on the continuation move above that reaction candle.
Contrast this with entering immediately on the breakout candle at a potentially inflated price with a stop well below the level. The retest entry gives you a tighter stop, a better entry price, and confirmation that the breakout is genuine.
Volume and volatility filters that separate real breakouts from fake outs
A legitimate breakout is almost always accompanied by a volume spike. The standard threshold is relative volume of 1.5 or higher, meaning trading volume at least 50 percent above the 20-period average. At 2.0 relative volume (double the average), the breakout carries substantially more conviction. Below-average volume during a breakout is a red flag; it tells you that institutional participation is absent and the move is likely being driven by retail momentum that won’t sustain. For practical commentary on breakout volume and volatility, see IG’s guide to breakout volume and volatility.
On the volatility side, true breakouts tend to follow periods of compression. The TTM Squeeze indicator captures this precisely: when Bollinger Bands contract inside Keltner Channels, it signals a low-volatility coiling phase. When the Bollinger Bands expand back outside the Keltner Channels, the indicator fires green dots, signalling that volatility is expanding and a directional move is underway. A breakout from a compressed, low-volatility range on high volume is the highest-quality breakout setup available. The momentum histogram on the TTM Squeeze then confirms the direction: positive and rising means the expansion is bullish, negative and falling means it’s bearish. For a practical primer on this indicator, see TrendSpider’s introduction to the TTM Squeeze.
When to walk away from a breakout setup entirely
Three conditions disqualify a breakout from being tradeable. First, if the breakout candle’s wick penetrates the level but the candle closes back inside the prior range, that’s a textbook false break signal, the market tested the level, found no follow-through buying interest, and snapped back. Second, if momentum indicators like NPF Momentum diverge from the price move (price makes a new high while NPF Momentum makes a lower high), the breakout fuel is running out before the trade even sets up. Third, if the breakout runs against the dominant higher-timeframe trend, the failure probability is dramatically elevated.
Apply this as a simple filter: if at least two of the three core confirming factors, retest, volume spike, and volatility expansion, are absent, skip the trade. There will always be another setup. The traders who last in this market are the ones who hold to their filters on every single trade, not just when it’s convenient. One impulsive breakout trade on below-average volume that fails is enough to offset three clean, confirmed setups.
Setting stops and targets around S&R levels
The whole value of trading at clearly defined price levels is that they give you a logical reason to be in the trade and a logical place to be wrong. That logic translates directly into stop and target placement. Entries grounded in defined risk are what separate structured traders from those who move their stops emotionally and wonder why their results are inconsistent.
Stop placement: where logic, not emotion, sets the line
For long trades at support, the stop belongs just below the S&R zone with a small buffer, not inside the zone. The buffer exists because price frequently probes just below a support zone before reversing, a move that’s normal price noise rather than a genuine breakdown. A stop placed too tightly inside the zone gets hit constantly on valid setups, creating a string of small losses on trades that ultimately went in the right direction.
For short trades at resistance, the stop goes just above the zone with the same buffer logic. The size of the zone determines how large the buffer needs to be. A wide zone on a volatile stock, a major ASX resources company like BHP or Rio Tinto, for instance, warrants a larger buffer than a tight zone on a low-volatility consumer staples stock. Scale the buffer to the instrument’s normal price behaviour, and you’ll stop getting taken out by noise while staying in the trades that genuinely work.
Targeting the next major level with the 1:2 risk-reward rule
The target for a bounce trade is the next clearly defined S&R level in the direction of the trade, the prior swing high for a long trade, or the prior swing low for a short trade. For a breakout, the measured move target is calculated by taking the depth of the prior consolidation and projecting it from the breakout point. A stock that consolidated in a $3.00 range before breaking out has a measured move target of $3.00 above the breakout level.
Here’s a concrete example. A long trade is entered at $48.20 after a bullish pin bar forms at a daily chart support zone. The stop is placed at $47.80, giving a stop distance of $0.40. The minimum target under the 1:2 rule is $48.20 plus $0.80, equalling $49.00. The next major resistance level on the chart sits at $49.20, that resistance exceeds the minimum target, so the trade qualifies. Risk is $0.40, potential reward is $1.00, giving a risk-reward ratio of 1:2.5. Before entering, that check takes approximately 60 seconds. Done consistently, it removes every marginal trade where the reward doesn’t justify the risk.
Common mistakes traders make with S&R, and how to stop making them
Understanding the rules of support and resistance in stock trading and applying them consistently under live market conditions are two entirely different challenges. Most traders grasp the concepts quickly. Most also repeat the same three critical mistakes on every chart until something forces them to address the problem systematically.
Trading S&R as exact lines instead of zones
Traders who draw single-price lines as their S&R reference consistently get stopped out of valid trades by minor wicks, or miss entries entirely because price reversed two cents above their line. The cost isn’t just one bad trade; it’s a pattern of slightly-off entries and exits that erodes a trading account gradually over months. The zone-based approach covered earlier in this article directly solves this problem.
The fix is straightforward: before dismissing a level as broken, check whether price closed decisively through the zone or simply produced a wick that entered the zone and rejected. A wick into a zone with a strong closing candle in the other direction is a confirmation of the zone’s validity, not a violation of it. Adjust your framework and the false invalidations disappear.
Trading against the dominant trend at S&R levels
The highest-probability S&R setups align with the prevailing trend. Buying at support in a clear uptrend and selling at resistance in a clear downtrend gives the trade structural backing from the broader market direction. Counter-trend setups at S&R levels require far stronger confirmation signals to justify the lower base probability, and most beginners don’t apply those stricter criteria.
The most common version of this mistake is shorting a strong uptrend every time price touches a resistance level. The trader takes loss after loss as the level breaks repeatedly, because up trending stocks break resistance, consolidate, and keep moving higher. Trend alignment is a prerequisite filter, not an optional consideration. Before acting on any S&R signal, establish the dominant trend on the higher timeframe first, then only take setups that work with it.
Skipping confirmation and entering on the touch alone
No confirmation discipline is the fastest path to consistent losses at S&R levels. Price touches support, a trader enters immediately without waiting for a candle to close, and the level slices straight through on the next bar. The trader exits for a loss on a level that was genuinely significant but had simply not yet produced a reaction worth acting on.
Waiting for the candle to close is not passive; it’s the disciplined application of a rule that meaningfully improves trade outcomes. The patience required to let a setup fully form before committing capital is one of the most difficult skills to develop, and one of the most valuable once it becomes habitual. Every time the urge to jump in early arises, ask whether the confirmation candle has closed. If it hasn’t, the setup isn’t ready.
About N P Financials (NPF)
N P Financials (NPF) is an ASIC-regulated financial trading education and coaching firm built around a structured 5-step trading system: Learn, Practice, Back Test, Demo Trade, and Trade Live. NPF’s 1-on-1 coaching programme, up to 48 sessions depending on the course, gives students the opportunity to work through S&R concepts and live chart analysis in a controlled, accountable environment. Head mentor Partha and the NPF team focus on diagnosing errors in real time, addressing the psychological dimension of trading mistakes, and rebuilding students’ frameworks where needed. For Australian traders looking to shorten the trial-and-error curve that most self-taught traders endure, structured mentorship is worth considering before costly mistakes accumulate, not after.
Building a consistent process around support and resistance in stock trading
Support and resistance in stock trading aren’t complicated concepts. They become complicated when traders apply them without structure or patience, and without a clear framework for filtering the signals worth acting on from the noise that isn’t. The rules covered in this guide aren’t arbitrary, they’re derived from the underlying mechanics of how price and orders interact at these levels.
The hierarchy is straightforward. Identify major levels on higher timeframes first. Draw zones, not lines. Wait for a confirmation candle before entering any bounce trade. Filter breakouts with volume and volatility checks, and only enter on retests where possible. Place stops at logically defined points just outside the zone. Check the risk-reward before committing capital, and only take trades where the target meets the 1:2 minimum ratio. Align every setup with the dominant trend on the higher timeframe.
The traders who use price levels profitably aren’t doing anything fundamentally different from what you’ve read here. What separates them is the consistency with which they apply these rules when it matters, in a live market, with real money, when every instinct says to rush an entry or move a stop. That consistency is built through repetition and genuine feedback on why each rule exists. Start building that foundation now, and the framework will carry you through market conditions that trap the undisciplined every time. If you struggle with holding winners or managing the emotional urge to exit early, see How To Hold On To Profits In Trading Without Exiting Early for practical methods to improve your trade management.
Written by
Partha
Partha Banerjee is the Founder, Principal Trader, and Director of N P Financials Pty Ltd, one of Australia’s most respected ASIC-regulated proprietary trading and trader-training firms and an AFSL holder. With decades of experience across multiple market cycles, Partha is known for his disciplined, structure-first trading approach, grounded in transparency, risk management, and real-market execution.
He actively trades the same strategies he teaches, specialising across Forex, Equities, Commodities, Indices, Cryptocurrencies, and intraday markets. Under his leadership, N P Financials has become a globally recognised trading education and proprietary trading organisation, earning multiple national and international awards for regulatory excellence, educational depth, and long-term trader outcomes.
Connect with Us:
info@npfinancials.com.au
+61 3 9790 6476
